The Electricity Generation Company (Egenco) has successfully restored 23.7 megawatts (MW) of generation capacity at Nkula B and Nkula A hydro power stations. This recovery follows the conclusion of repair works that began after a forced outage in August 2026. The restoration includes the return to service of the 20MW Unit 6 at Nkula B Power Station and the reclamation of 3.7MW at Nkula A through the replacement of worn-out shaft seals.

Egenco announced the restoration in a public notice on Friday, stating that further recovery of 3.7MW at Nkula A is expected by the end of November. This will bring the total reclaimed capacity at the station to 7.4MW. The company remains committed to ensuring the reliability and availability of its generating units through timely maintenance, repairs, and continuous improvement. The goal is to have all units operate at their designed capacities.

Before the latest repairs, Nkula A was generating 24MW against its installed capacity of 35.1MW due to faults affecting three generating units. The Electricity Supply Corporation of Malawi (Escom) had reported that available generation capacity stood at 347MW against peak demand of 430MW in August, representing a deficit of 83MW. This deficit has been a major challenge for the country, leading to power outages.

Despite the restoration of 23.7MW, consumers continued to face power outages lasting between three and a half and five hours, as shown in the Escom load shedding schedule for November 14 to 15. The duration of the outages remained unchanged from the previous schedule. Minister of Energy Jean Mathanga has stated that the government is targeting to stabilise the national grid and ensure a more reliable electricity supply before the December festive season.

The government is also banking on the Mozambique-Malawi power interconnection project, which is expected to add 50MW to the national grid. This project aims to enhance the country's power supply and reduce the current deficit. Consumers Association of Malawi executive director John Kapito has previously emphasised the need for Malawi to generate more electricity to address power supply deficits.

Malawi has a total installed capacity of 554.24MW, comprising 401.8MW from hydro, 51.4MW from diesel power generation, and 101MW from solar sources. The country continues to face challenges in meeting its electricity demands, highlighting the need for further investment in power generation and infrastructure.

The restoration of 23.7MW at Nkula B and Nkula A hydro power stations is a positive step towards addressing the power supply deficits in Malawi. Egenco's efforts to maintain and repair its generating units are crucial in ensuring a reliable electricity supply. The government and other stakeholders must continue to work together to address the country's power needs and provide a stable electricity supply.

Key points

  • Egenco restores 23.7MW at Nkula B and Nkula A hydro power stations
  • Government targets to stabilise national grid before December festive season
  • Mozambique-Malawi power interconnection project to add 50MW to national grid

Reporting sources

Share this story

Written by

SaharaWire Newsroom
SaharaWire

Reporting for SaharaWire from the Nairobi bureau.